Kerala PSC Electrician Grade 2 Syllabus 2026 & Exam Pattern : Important Topics & Weightage

The Kerala PSC Electrician Grade 2 Syllabus 2026 is an important resource for candidates preparing for the upcoming examination. Knowing the syllabus in advance helps candidates understand what to study, focus on important areas and manage their revision time better. Check the complete Kerala PSC Electrician Grade 2 syllabus 2026, including the module-wise topics, marks and exam pattern and plan your preparation with a clear understanding of the examination requirements.

Kerala PSC Electrician Grade 2 Exam Pattern 2026

The Kerala PSC Electrician Grade 2 exam pattern 2026 is based on a 100-mark syllabus divided into 20 modules. Each module is assigned 5 marks in the official detailed syllabus. This means candidates cannot identify one single high-weightage module from the Electrician official syllabus because all 20 modules carry equal prescribed weightage.

Kerala PSC Electrician Grade 2 Syllabus in Detail

The Kerala PSC Electrician Grade 2 syllabus 2026 covers 20 modules, each carrying 5 marks. It includes electronics, electrical safety, AC and DC machines, transformers, digital electronics, solar power, relays, power generation, batteries and control panel wiring. Check the detailed syllabus below for complete module-wise topics and marks.

Module 1: Basic Electronics (5 Marks) 

Active and Passive components, Resistors, Resistor types,  Resistor colour code,Capacitors, Types of capacitors, , Resistors  in series, Resistors in parallel, Series and parallel connection of  capacitors,Inductors. 

Module 2: Power Supply Circuits (5 Marks)  

Intrinsic and extrinsic semiconductor, PN junction diode, Forward  and Reverse characteristics, Specification of diodes,Special  semiconductor diode: Zener diode, tunnel diode, Rectifiers: Half  wave rectifier, Full wave rectifier (bridge & center tapped), ,Filters: Introduction, purpose and use of ripple filter, Types of  filters:capacitor filter&Inductor filter, Voltage regulators:  Introduction & purpose, Zener regulators, , Series regulators. 

Module 3: Transistor & Amplifiers (5 Marks) 

Transistors,NPN & PNP transistor, Symbol, Operation, Input and  output characteristics, Biasing of transistor,Transistor CB, CC, CE configurations, current gain, voltage gain, and power gain.  Amplifiers: Classification of amplifiers,Voltage amplifiers, Single stage CE amplifier, Emitter follower circuit, RC coupled amplifier, Voltage and power amplifier.

Module 4: Oscillators (5 Marks)

Oscillators: Basic working principle,Introduction to positive  feedback, Requisites of an oscillator, LC oscillators and RC  oscillators, Colpitts oscillator, Hartley oscillator, Crystal  oscillator,RC phase shift oscillator, Wien bridge oscillator,Multivibrators: Astable multivibrator, Monostable  multivibrator, and Bistable multivibrator. 

Module 5: Digital Electronics (5 Marks) 

Number systems: Decimal number system, Binary number  system, Octal number system, Hexadecimal number system,BCD code,Numbersystem Conversions: Binary to decimal conversion,  Decimal to binary conversion, Decimal to octal conversion, Octal  to binary conversion, Hexadecimal to binary conversion, Binary to hexadecimal conversion, Logic gates: OR gate, AND gate, NOT  gate, NAND gate, NOR gate, XOR gate,Logic families and their  comparison. 

Module 6: Communication Electronics (5 Marks)  

Communication system, Radio wave propagation, Modulation and Demodulation, Types of modulation,Amplitude Modulation (AM),  Modulation index, Types of AM, Bandwidth in AM, Frequency  Modulation (FM), Modulation index in FM, Bandwidth in FM,  Phase Modulation (PM), Digital modulation techniques ,  Superheterodyne AM receiver. Basics of Mobile communication.

Module 7: DTH &Cable TV (5 Marks) 

Satellite communication- introduction,Electromagnetic spectrum  and Frequency bands in Satellite communuication, DTH  -introduction, DTH Terminology and components,Dish assembly,  Mount Assembly,Basics of Digital cable technology,Headend  system & Distribution Network,Multiplay digital services,FTTH.

Module 8: UPS and Inverters (5 Marks) 

UPS: Introduction, Block diagram of UPS, Working principle of  UPS, Types of UPS, Inverter: Introduction to inverter, Block  diagram of inverter, Working principle, Applications. 

Module 9: Solar Power (5 Marks) 

Solar energy principles, Solar cell, Solar cell materials, Types of  solar cells, Working of solar cell, Photovoltaic module,  Photovoltaic array, Solar Photovoltaic (SPV) system, Safety  precautions in solar electric system, Maintenance of solar electric  system.

Module 10: Electronic Home Appliances (5 Marks) 

Basic  principle, Working and operation of LCD TV and LED TV, Home  Theater Audio speaker- type and features,Blue tooth and  Wireless connectivity , LED light system,LED bulbs, Emergency  lamp, Induction cooktop.

Module 11: Basic Electricity And Safety Practice (5 Marks) 

• Basic Electricity And Safety Practice  
• Safety rules, Fire,types of fire  
• Fundamentals of electricity, 
• Soldering techniques and flux  
• Conductor, Insulator, Semiconductor  
• Types of wires and cables 
• Ohm’s law Kirchhoff’s law  
• DC series and parallel circuits, 
• Open and short circuits, 
• Laws of resistance  
• Methods of measuring low, medium, high value resistances,  Effect of temperature on resistance.

Module 12: Magnetism (5 Marks)  

• Types of magnets, 
• Classification of magnetic substances,  
• Properties and different terms related to magnets  Methods of magnetizing, Electromagnetism ,  
• Right hand grip rule and palm rule, 
• Mmf, flux, reluctance, flux density, permeability,  Hysteresis 
• Inductance, counter emf 
• Faraday’s laws of electromagnetic induction

Module 13: Alternating Current and Earthing (5 Marks)  

• Alternating current, 
• Inductive reactance ,capacitive reactance,impedance,power  factor  
• RLC series and parallel circuits 
• Series and parallel resonance circuits 
• Power triangle,power factor improvement  
• Wiring accessories 
• Types of wiring both domestic and industrial Grading of cable and wires Current rating, Testing of domestic installation 
• Earthing ,types of earthing

Module 14: DC Machines (5 Marks)  

• DC Generators and Types 
• Emf equation of DC generator 
• DC series, shunt and compound Generator DC motors and types Back emf 
• DC motor starters 3 point, 4 point  
• Speed control methods of DC machine Braking of DC motors Losses and efficiency

Module 15: AC Machines (5 Marks)  

• Principle of induction motor 
• Types of AC motors 
• DOL, Star delta, rotor resistance motor starter  
• Auto transformer starter 
• No load and blocked rotor test 
• Speed control of AC motors Types of Single phase motors  Alternator 
• Emf equation of Alternator Synchronous motor

Module 16: Measuring Instruments and Transformers (5 Marks)  

• Measuring Instruments and classification  
• Indicating,integrating,recording instruments 
• Deflecting torque,Controlling torque and Damping Torque Two  wattmeter method of power measurement 
• Megger ,earth tester Instrument transformers Range extension of  meters Basic principle of Transformer 
• Parts and classification of transformer Emf equation of  transformers 
• Parallel operation of Transformers Voltage regulation and  efficiency Methods of Cooling, 
• Protective Devices

Module 17: Illumination and Domestic Appliances (5 Marks)  

• Terms used in illumination 
• Laws of illumination Types of lamps Domestic appliances 
• Geyser ,electric iron,food mixer,cooking range,induction  cooker,grinder

Module 18: Types of relays and circuit breakers (5 Marks) 

• Classification of relays, 
• Types of relay,Over current relay, 
• Over voltage relay, 
• Under voltage relay 
• Differential relay, 
• Earth fault relay, 
• Distance relay ,Admittance relay 
• Impedance relay,Reactance relay 
• Air circuit breaker 
• Vacuum circuit breaker 
• SF6 circuit breaker 

Module 19: Power Generation and Transmission (5 Marks)  

• Sources of energy Generation 
• Various types of power generation Transmission and Distribution  Electrical substation 
• Non conventional sources of power generation Line insulators AC and DC transmission comparison

Module 20: Cells And Batteries - Control panel wiring (5 Marks)  

• Chemical effect of electricity 
• Faraday’s laws of electrolysis 
• Types of Primary and secondary cells Cathodic protection in  electroplating Grouping of cells 
• Solar cells 
• Control panel wiring accessories 
• AC/DC drives

How to Download Kerala PSC Electrician Grade 2 Syllabus PDF 2026?

Candidates can download the Kerala PSC Electrician Grade 2 syllabus PDF 2026 directly from the Kerala Public Service Commission website. The official PDF is the most reliable source for checking the complete syllabus and module-wise marks. Follow the steps below to download it:

1. Visit the official Kerala PSC website.
2. Go to the Recruitment or Syllabus section of the website.
3. Search for Electrician Grade 2 Printing Department or Category No. 771/2025.
4. Open the official Kerala PSC Electrician Grade 2 syllabus PDF.
5. Check the 20 modules and their prescribed marks.
6. Click the Download option to save the syllabus PDF to your device.
7. Keep a copy of the PDF for reference during your preparation.

Candidates can also use the direct official syllabus PDF link below:

Kerala PSC Electrician Grade 2 Syllabus 2026 PDF - Download Here

Prepare for Kerala PSC Electrician Grade 2 with CC Learning App

Preparing for the Kerala PSC Electrician Grade 2 Exam 2026 requires a clear understanding of electrical engineering, electronics and other technical topics included in the syllabus. A structured study plan can help candidates cover all 20 modules while giving enough time for practice and revision.

CC Learning App, a multi learning platform, supports Kerala PSC Electrician Grade 2 preparation with structured classes, practice sessions, revision support and tests. Candidates can follow the syllabus systematically and track their progress through regular practice.

Kickstart your Kerala PSC Electrician Grade 2 preparation with CC Learning App, best PSC online coaching app, and stay focused on the syllabus, important topics, practice and revision for the upcoming examination.

Frequently Asked Questions

1. When is the Kerala PSC Electrician Grade 2 Exam 2026?

The Kerala PSC Electrician Grade 2 examination under category 771/2025 is scheduled for 15 December 2026, Tuesday.

2. What is the category number of Kerala PSC Electrician Grade 2?

The category number is 771/2025 and the post is Electrician Grade 2 in the Printing Department.

3. How many modules are there in the Kerala PSC Electrician Grade 2 syllabus?

The official syllabus contains 20 modules, with each module carrying 5 marks, making a total of 100 marks.

4. What is the total mark of the Kerala PSC Electrician Grade 2 exam?

The prescribed syllabus carries a total of 100 marks.

5. Which topics are included in the Kerala PSC Electrician Grade 2 syllabus?

The syllabus covers basic electronics, power supply circuits, transistors and amplifiers, oscillators, digital electronics, communication electronics, DTH and cable TV, UPS and inverters, solar power, electrical safety, magnetism, AC and DC machines, transformers, measuring instruments, relays, power generation, cells, batteries and control-panel wiring.

7. What is the salary of Kerala PSC Electrician Grade 2 ?

The scale of pay specified in the recruitment notification is ₹27,900 - ₹63,700.